THERMOCOLOR HSP – Hot spray thermoplastic road marking material
Thermocolor HSP thermoplastic material has in its composition reflective glass beads and represents the optimal solution for refreshing thermoplastic road markings or for applying a thin layer of new road marking.
Thermocolor HSP is designed for road markings application at a layer thickness of 800 up to 1500 µm on all bituminous or concrete surfaces (in which case it is mandatory to apply first AC-341 primer). The application is made by spraying the thermoplastic material heated at a temperature of 180-210°C with specialized road marking machines.
Road markings applied with Thermocolor HSP have a good retroreflection throughout their entire service life due to the glass beads incorporated in the product.
Products: AC-341 primer, thermoplastic material Thermocolor HSP, reflective glass beads.
Note: AC-341 primer is used on concrete surfaces and old asphalt surfaces with old bitumen or poor in bitumen that do not provide good adhesion anymore.
Characteristics and advantages:
- Thermocolor HSP thermoplastic material is solvent-free and environmentally friendly;
- excellent as maintenance marking for thermoplastic road markings applied in thicker layer;
- good daytime and nighttime visibility;
- open to traffic a few minutes after application.