PREFORM TCG - Preformed thermoplastic for horizontal road markings
The preformed thermoplastic material PREFORM TCG is a durable product for road markings, having 3 mm thickness, intended for application in high traffic areas, on roads, on highways and inside cities. It is ideal for the realization of horizontal road traffic signs such as: signalization of pedestrian crossings, speed limits etc.
MorePLAYFORM - Playground marking games for kids, Company logos and Street decorations
© 2010-2016 Metalbac & Farbe. All rights reserved.
MoreTHERMOCOLOR HSP - Hot spray thermoplastic road marking material
Thermocolor HSP thermoplastic material has in its composition reflective glass beads and represents the optimal solution for refreshing thermoplastic road markings or for applying a thin layer of new road marking.
Thermocolor HSP is designed for road markings application at a layer thickness of 800 up to 1500 µm on all bituminous or concrete surfaces (in which case it is mandatory to apply first AC-341 primer).
MoreTHERMOCOLOR TCA - Non-slip colored carpet
Thermocolor TCA is a special thermoplastic material designed for the application of colored anti-skid coatings mixed with hard mineral aggregates, creating surfaces with high wear resistance and excellent slip resistance.
The thermoplastic anti-skid coating is recommended for application in layer thicknesses of 3–5 mm in high-risk accident areas, speed-restricted zones, before pedestrian crossings, and in all other areas where hazard warning or traffic calming markings are needed.
MoreTHERMOCOLOR P26 - Thermoplastic road marking material
Thermocolor P26 thermoplastic material is designed for application of flat road markings at a layer thickness of 2-3 mm. The thermoplastic material Thermocolor P26 can be applied through extrusion as longitudinal road marking or as transverse or diverse markings such as: horizontal road marking signs, pedestrian crossings, bicycle lanes, parking spaces etc.
MoreTHERMOCOLOR RS28 - Thermoplastic Multidot/Agglomerate road marking material
Thermocolor RS28 thermoplastic material is designed for application of multidot or resonator road markings on roads and highways.
Most often in rain or in bad weather conditions, which cause poor night visibility, a properly marked road makes the difference.
MoreFARBEPLAST FP CA
Farbeplast FP CA is a 2-K Cold-Plastic-System based on methyl methacrylate (MMA) resin and was designed to increase road safety in dry and wet weather conditions.
Colored area markings made with Farbeplast FP CA incorporate anti-skid aggregates.
MoreFARBEPLAST Plan - Cold plastic road marking material based on methyl methacrylate
Farbeplast - Plan is a 2K Cold-Plastic system, based on MMA (methyl methacrylate), that can be used for application of 1 up to 3 mm thick flat (plain) road markings.
The 2K material Farbeplast - Plan can be applied as longitudinal road marking through extrusion with special road marking machines or as transverse or diverse markings such as: horizontal road marking signs, pedestrian crossings, bicycle lanes, parking spaces etc.
MoreAQUAMARK 3A - Waterborne road marking paint
Aquamark 3A is an environmentally friendly waterborne paint based on last generation acrylic emulsions. This easy to use paint is designed for application of road marking on asphalt surfaces.
MoreFARBEPLAST Profilat - Cold plastic road marking material based on methyl methacrylate
Farbeplast – Profilat is a 2K Cold-Plastic system, based on MMA (methyl methacrylate), which can be used for application of profiled road markings up to 8 mm.
Road markings made with Farbeplast – Profilat have a resonator effect and can be applied by extrusion with specialized road marking machines (for profiled longitudinal markings) or manually (for rumble stripes).
MoreINTERTRAFIC 3S EN
MoreFARBEPLAST Structurat - Cold plastic Agglomerate/Spotflex road marking material
Farbeplast – Structurat is a 2K Cold-Plastic system, based on MMA (methyl methacrylate), which can be used for application of Agglomerate road markings (stochastic three-dimensional structure) or Spotflex road markings (multi-dot, symmetric three-dimensional structure).
Agglomerate and Spotflex are Type II road markings, allowing water dissipation so that the glass beads from the surface can reflect light without obstacles, ensuring a good nighttime retroreflectivity in rainy weather conditions.
MoreQUARTZ - road marking solvent based paint
Quartz is a solvent based paint designed for application of road markings on asphalt and concrete surfaces. The 100% pure acrylic resin used in its composition makes it ideal for road marking application on all types of roads, highways, airports, but also for horizontal road marking signs, pedestrian crossings, bicycle lanes etc.
MoreSPRAYPLAST 100 - Cold plastic road marking paint based on methyl methacrylate
Sprayplast 100 is a 2K spray cold-plastic material based on MMA (methyl methacrylate). This bicomponent material forms hard and very resistant films in a very short time by curing with the help of the liquid hardener Farbeplast FP-IL.
MoreSPRAYPLAST 50 - Cold plastic road marking paint based on methyl methacrylate
Sprayplast 50 is a multi-component spray cold-plastic material based on MMA (methyl methacrylate). This cold-plastic road marking material forms hard and very resistant films in a very short time by curing with the help of the powder hardener Farbeplast FP-IP.
MoreAcrylic wall paints for exterior application
Acrylic systems are products for exterior application based on acrylic resins/emulsions formulated with special additives and high quality pigments. They provide durability and resistance to discoloring.
MoreWater-based Acrylic system
Water-based products for decorative finishing of metal surfaces and for wood protection contain pure or modified acrylic emulsions, special pigments, additives and water.
The film formed after drying shows a very good elasticity, adhesion and resistance to environmental factors, these properties makes it suitable for regular use interior and exterior, on new or previously painted surfaces.
MoreAcrylic wall paints for interior application
Acrylic wall paints for interior are environmental friendly products based on acrylic dispersions. They can be thinned down with water for spray application.
MoreEpoxy system for floorings
Epoxy products for floors are two-component products with low organic solvents content. Due to high resistance to aggressive factors, friction, mechanical wear and exposure to chemical environments, these products are recommended especially for protection and finishing of interior concrete floors subjected to intense traffic.
MoreEpoxy System for metal surfaces
Epoxy products for metal surfaces are two-component products that form hard films with outstanding resistance in aggressive industrial environments by chemical reaction with specific hardeners.
MoreAcrylic anticorrosive system for metal industry
The acrylic anticorrosive system is designed for temporary anticorrosive protection of metal surfaces, especially during storage and transport. Combination of last generation raw materials made it possible to obtain a water-based ecological product that offers anticorrosive protection.
MoreAlkyd - acrylic system
The alkyd - acrylic system consist in products designed for metal surfaces, based on a mixture of acrylic and alkyd resins, high quality pigments, anticorrosive pigments (for primers), siccatives and solvents.
More
